Overview
Hello Everyone. Here is my first Heavy Sniper. The Titan walker is a pure Walker. Its slow but can take a hit like most snipers cant claim they can. Like most of my builds in T10 it takes full advantage of the 1511 CPU so its Block and CPU intensive. Have Fun.
What You Need
Part
Cube Count
T10 Price
Carbon Price
Cubes
462
4,529,656 RP
11,074,140 RP
Prisms
118
1,131,384 RP
2,828,460 RP
Inners
32
306,816 RP
767,040 RP
Tetras
44
421,872 RP
1,054,680 RP
Short Aero Rod
10
383,520 RP
N/A
Curved Aero Rod
12
560,224 RP
N/A
T10 Walker Legs
6
593,916 RP
N/A
T10.1 EP
3
335,550 RP
N/A
T10.9 EP
2
223,700 RP
N/A
T10 Rail
6
703,068 RP
N/A
Total
697
9,106,590 RP
15,724,320 RP
Building The Chassis
Color Guide
- White– Solid Cubes
- Glass– Prisms
- Light Blue– Tetras
- Green– Inners
Step One
Here We are going to start from the bottom and work our way up. In this step there are 21 cubes in the front. 21 in the back. 13 prisms cover the front and 13 in the back. This is a very symmetrical build so everything will look even.
Step Two
Next we are placing 23 cubes in the Front. 23 cubes in the back. 10 Prisms in the front. 10 In the back. These are accompanied by 6 Tetras front. 6 in the back. The Pic on the right shows the direction for the Tetras
Step Three
Now here we are finally connecting the two halves together with a nice platform. This step Consists of 61 Cubes and 16 Prisms.
Step Four
Building on our Platform, We are placing another 61 Cubes, and 16 Prisms.
Step Five
Here We will be placing a total of 55 Cubes. Leaving a space open for the pilot seat. There are 14 Prisms here all angled with the slope down. 12 Tetras and 12 Inners. The direction of the inners in the middle are mirrored.
Now place your pilot seat down. Then you place the 4 Short Areo Rods in the middle of this bot. This helps keep it together when shot from behind.
Step Six
Next we will create another layer on the body with 79 Cubes and 10 Prisms.
Then place the 2 Short Areo Rods in the slots on the side and the 4 in the Center.
Step Seven (Almost there)
Alright the second to last layers has 67 cubes, 14 Prisms,12 Tetras, and 12 Inners.
Step Eight (Final Layer For The Body)
The Final top layer has 51 Cubes, 8 Tetras, 8 Inners and 2 Prisms.
Hardware
Step One-Gun Mounts
Alright. So i messed up a little with this mount. The Picture on the left shows where you need to mount too the body. The one on the Right shows the correct placement for the Areo rod that branches out away from the body. This takes up 6 Curved Aero Rods and 2 Cubes.
This is the Mount configuration for the Front of the bot. Taking up 4 curved Aero Rods and 2 Cubes.
Finally we need to place 2 areo rods total curving Up mounted to the 2 Rods built into the body in a previous step.
In the End the Mounts should look like this.
Step Two-Legs
The legs are pretty straightforward. We are placing a total of 6 Walker legs in the Leg mounts around the body. One in the Front, One in the back and a total of four on the sides.
Step Three-Electroplates
Next we are going to place 2 T10 Electroplates fitting them in the Divits on the top of the Bot like so.
After that we slip in 3 T10.1 Electroplates in between the T10s and place 2 T10.9 Electroplates on top of the rear gun mount Cube.
Final Look
So there you have it. The MK 1 Titan Walker. This bot is a Defensive bot. It would benefit you to stay near the Base shield. You aren’t very fast so straying too far will most likely doom you unless you have a nice medic with you. The weapons are made to snap off and on. So while they do get removed fairly easily, they also heal back rapidly. The Titan walker is made to take hits long enough to get out of fire. Happy sniping!
