Overview
This is a step by step building guide to my tier 10 plasma bomber.
introduction
Hi,
Today I’ll be showing you how I created my tier 10 plasma bomber. It uses a lot of shields so you’ll need quite a lot of cpu. If you rushed through the tiers you probably won’t be able to build it exactly like I did. I’m currently at level 66 and i almost used all of my flops. I didn’t use the triforce technique but it still has a pretty high survival rate if you play it right.
It does get oneshotted like a lot of planes but not often it really has to be a lucky T10 rail shot. else it can take a lot of smg or plasma damage because of the shields but watch out for your top wich is a lot weaker, a T10 plasma volley there and you WILL be dead so play smart try to gain an altitude advantage on your enemy and blast them with your quicker reload of 5 plasmas which can get you that extra killing shot before your enemy can.
requirements
So on to the requirements.
at least 1120 pFLOPs
you can use any tier you want except for the shields of course
5 prisms
99 cubes
4 T9 rudders
1 T5 rudder
5 T10 thruster
5 T10 plasma cannons
2 T5 electroplate (R) (optional for the corners)
2 T5 electroplate (L) (optional for the corners)
2 T8 electroplate (R)
4 T8 electroplate (L)
2 T9 electroplate (R)
2 T9 electroplate (L)
I didn’t use any radar jammers or flippers or whatever but feel free to add them if you have the cpu and really want them.
If you want to build it from scratch (with tier 10 prisms and cubes) it’ll cost you 2,909,554 rp
(I acyually used my calculator for this xD)
building
So now we’re going to build this beast xD
first start off with a 10×2 rectangle of blocks in the length of your bay with 2 arms of 5 blocks wide sticking out the 6th block counted from the front: (30 cubes)
Then underneath you build this:(38 cubes)
Afterwards the turrets for the guns:(10 cubes)
then you’re going to build this: the picture is taking towards the front of the bay if you got this wrong just put them the other way around when we place the shields:(2 prisms)
then replace these cubes by prisms so you at least get some protection around your little seat xD:(3 prisms)
then place 2 additional cubes here. (2 cubes)
then place 2 T8 (R) shields like this: (2 T8 shields (R))
place a T8 (L) shield like this on the front and back:( 2T8 shields (L))
put 2 more T8 (L) shields on the nose and tail like this: (2T8 shields (L))
You can see they fit snugly with the other T8’s
add tier 9 rudders like this: (4 T9 rudders)
add 2 tier 9 (R) shields on the right side of the aircraft like thiswith the first shields point pointing to the front: 2 T9 (R) shields
do the same thing on the left side: (2 T9 (L) shields
add a tier 5 (L) shield like this(front left side):
add one on every corner so they look like this:
add the pilot seat
add the thrusters
add the tier 5 rudder:
add a gun on the center mounton the right prism:
add the other guns on the other mounts:
result
so it should look something like this.
You could put the T5 shields the other way but i like them better this way in a kinda scarab pattern or you could remove them but i think the corners are a little exposed if you remove them.
Any tips or adjustments you did to make it better put it in the commentary i like learning from other people with other visions on the matter.
Or if you think its a flying turd that handles like a jumbojet in a storm please let me know (but maybe in a slightly nicer way ;p)
Other guide: the destructive diamond
If you’d like a plane thats tier 9 but still uses a heck of a lot of shields check out my other guide: the destructive diamond
[link]