Overview
Hello, everybody!My name is MisterDartVader and i’m here today to present you my first Robocraft robot published on the Steam Community!It is a Tier 9 Nano-Healer. I hope you like it!
Introduction
Hello, people!
Today i will be showing you how to build my first medic design for Robocraft! I just had nothing to do, as my current PC broke and i couldn’t even play a single Tier 10 match in my notebook because of the lag, so i started making Tier 9 designs. I wanted to build a Medic/Healer because i heard that it gave more RP than the other classes and BANG! I built this, and it worked!
I find it a really cool and efficient design, for a Tier 9 robot.
Specifications
Minimum* CPU Required: 1385 (Level 88+)
Building Cost: 1.8 million ~*
Weight: 1816 Kg – 1843,5 Kg ~*
Block Amount: 142 – 144*
- Chassis: 101
- Movement: 10
- Hardware: 30
- Special: 1 – 3*
*Value depends on the presence of the Radar Jammer and Enemy Radar
Blocks Needed
Blocks
- Cubes: 41
- Prisms: 60
Movement
- Hover Pads: 4 pads, which can be from Tier 5 to Tier 8
- Thrusters: 6 Tier 4 thrusters
Hardware
- Nanotech Disruptors: 6
- Electro-Plates: 4 Tier 2 (2 L, 2 R), 8 Tier 5 (4 L, 4 R), 10 Tier 7 (5 L, 5 R) and 2 Tier 9 (1 L, 1R)
Special
- Pilot Seat: 1
Optional:
- Radar Jammer: 1 Tier 7
- Enemy Radar: 1
Building
Chassis
Firstly, make a simple triforced core:
Now, make the front part of the robo, where the medic guns are going to be placed:
Note that i’m using prisms. That’s only a little bit because of triforcing, but it’s mostly because of the robo balancing:
The 4 gun stands left:
Note that, in the image below, i only added cubes:
Last Chassis part:
Movement
So you made it there! This is where things start to get easier:
Now some Tier 4 Thrusters:
2 more Thrusters:
Hardware
Let’s put the 6 T10 guns, below and above:
Put the 4 Tier 2 Electro Plates:
Some Tier 7 Electro Plates here:
Some more here:
A few more there:
And the last ones there:
Now, to the Tier 5 Plates:
You’re almost finishing, bro!
The last Tier 5 Electro Plates:
And, for finishing it, the Tier 9 Electro Plates go there:
Adding Enemy Radar/Radar Jammer
Those steps are not necessary, but i’m adding it for the ones who don’t like to be “Enemy blind”. Only proceed if you agree to spend a little more CPU on this robo.
Simply add 2 blocks behind your bot and put your Radar Jammer and Enemy Radar near there:
Pros and Cons
Pros
- Good Nanotech Disruptor position, making it possible to heal in almost every way;
- Very effective defense against air units;
- Good defense against Plasma and Rail robots, because of it being almost entirely covered in Electro Plates;
- Very cheap design, when compared to other Tier 9 ones;
- Can get healed pretty fast, because of being mostly made of Electro-Plates.
Cons
- Not very stable;
- Decreased mobility;
- Big when compared to other Nano-Medics.
Finalization
Thanks for following the guide to this point! Have fun with your new Omega Healer design, and get a lot of RP and TP! Feel free to make reviews about this robo and don’t forget to rate it!