how to build your own avro lancaster

Overview

a guide to building your own avro lancaster in robocraft (this design is meant to be purely aestethic i cant gaurantee you it works in an actual battle)

parts required

to build this plane you will need:

– 1266 pflops cpu.

– 718 armor cubes including window blocks. (this can be any tier armor blocks but in this guide i will use t1 blocks)

– 4 t7 jammers.

– 6 t3 jammers.

– 2 t7 airofoils.

– 4 t5 rudders.

– 12 t4 thrusters.

– 1 pilot seat.

hull bottom and rear wings

now lets get on with the build.

Start by building a 31 blocks long line some 10 blocks from the ground and atleast 1 block from the sides.
Add these 2 lines of blocks to the sides
Finish the front part like this

Add these slopes to the rear

Add pilot seat 6 blocks from the front

Add extra windows, blocks and corners to the front

Add these blocks to the back

Add the sides and a block 3 spaces behind the seat

The elevator (rear wing of the aircraft)

main wings and inner engine bay

Copy this wing design and fill it up with cubes

Start with the front of the engines like this

Add t4 thrusters like this

Add these cubes and mirror this on the other wing

Finish this layer of the inner engine bay like this and mirror it on the other wing

Add another layer to the inner engine bay but leave the middle open mirror this on the other wing

Add 4 slopes like this from back to front

For the 5th slope add it like this off course you should mirror these 2 steps on the other wing (inner engine bay)

outer engine bay

Add these blocks to the outer engine bay and mirror it on the other wing

Add this layer to the outer engine bay and mirror it on the other wing

Add 4 slopes like this

Add a 5th slope like this and of course mirror these 2 steps on the other wing

finishing the hull

Build this tail fin on the end of each elevator (rear wing)

Add the nose turret like this

Finish the tail turret like this

Finish the sides of the hull like this

Add the top of the hull like this

Add the dorsal turret (top turret)

Finish the cockpit like this pay attention to the slope above the seat

the placing of the slope

landing gear and details

The tail wheel

Front landing gear extends from inner engine bay on each side

the wheels are t3 radar jammers

Add the propellers

The propellers are t7 radar jammers

Add t7 airofoils as wings

Add t5 rudders as tails

Add t5 rudders as elevators

done

if you have succesfully completed all these steps then you will now have your very own avro lancaster in robocraft.