Overview
This bot is very strong and quite easy to use.
YWN (You Will Need)
you will need:
40 blocks (any teir)
4 hoverblades (over T4 works best but most still work)
8 T5 electroplates (4 of each side)
4 nanotech guns (T6 or higher)
Step 1: the base
for this step you need 36 blocks of your preffered teir, i have used alternating colours to make placement obvious.
First thing is a 6X6 base as seen in the screenshot. Mirror mode does not work for an even number of blocks at the time this guide was written, so don’t bother trying.
Step 2: the 2 by 2
add 4 blocks in the middle of your square.
Step 3: hoverblades and chair
place th hoverblades on the 2 by 2 you made. As long as they are on the diagonals, (same colour blocks in my screenshot) it doesn’t matter where you put them, also put a chair on (side doesn’t matter
Step 4: ice-cream time!
place the electro plates. one block from the end of the BOTTOM layer, fairly self explanatory.
Step 6: lets make this thing useful!
add nanotech guns in the corners. forgive me if the t8+ are a different size, i am currently a t7 so i haven’t used t8+ things. However if you are a high enough teir to need these, then i think you may need some stronger electroplates.
OPTIONAL EXTENSION YOU CAN USE
Your bot is now finished! YAY! If you want more add a tower type thing in the middle, as protection from above. NOT NECCESARY but if you want to i think it helps.
GOOD LUCK AND HAVE FUN!
I hope this helps you, if it doesnt tell me how i can fix it. Remember to like and favourite. Have fun! 🙂