Overview
So you just started robocraft and you’re ready to go? Why not build yourself an awsome bot to get started and earn some crazy RP!
Removing The Original Starting Bot
- This is easy, hold control and click on the “Drive” tab at the top of your screen. (or press V)
- Then click the dismantle button, this will empty your garage.
- Success! We now have an empty garage to work with, click the build button to re-enter build mode.
The Build
Firstly, enable mirror mode (This can be done by pressing M). We are going to keep this enabled for the whole tutorial.
Now, lets get to work! Start by building this chassis (note that all wheels are steering mk1 and that the 4 corner blocks are tetras): 
Now we are going to add 4 light chassis tetras and 4 light chassis prisms.
Now we’re going to build the second layer (and add the pilot seat!), here I have 2 screenshots for you. I used 2 inners, 19 prisms and 24 cubes.
Now lets add the windscreen, to place the rear prism I did have to remove the pilot seat and place it on a block but it will be supported by the corner tetras.
Finally, it’s time to add the guns!!! (Note: I also added 2 prisms to the rear gun mounts.)
Outro
Thanks for reading this guide, I hope this robot will server you well (if you did end up building it).
Please post any suggestions in the comments. Here is the final bot (I added a holo-flag fore some finesse):
The first battle report (sadly we lost):
