Overview
First, carefully disconnect the module from the back.Make sure you don’t pull too hard and break the antenna wire.Be gentle. Put some paper/tape on the pinconnectors and gently push the module back half way.Make sure the transmitter is turned off but your LiPo is charged.Connect the trainerport to your mic/line in of your computer with a decent stereo male to male jackplug cableinstall http://www.smartpropoplus.com/site/to convert the signal of your tx to a joystickinput.Create a new (liftoff) model profile on your Turnigy9x (see 9x manual/google)Make sure smartpropoplus is receiving the inputs (if not, smartpropoplus help/google)make sure to center the sticks and set switches to neutral since they toggle the menu buttonsLaunch Liftoff, go to settings and run the calibration. (follow instructions)Switch/reverse channels in your Turnigy 9x transmitter menu if signals are reversed. (more info, see Turnigy 9x manual / google)This is how I use it, works very well.Enjoy!