Overview
Updated 4 January 2017, I’ve been tinkering away with my FFB settings for the last while and keep adjusting things all the time :-/Here’s my latest G29 FFB settings.For all you Logitech G29 owners, here’s my ?Real? Feel* force feedback setup guide. I’m no expert at setting wheels up etc for sim-gaming, but after some trial and error I found that this set-up worked the best for me and gave me the best feel. There is some force feedback clipping – which some people may adjust to personal preference – but for me it just feels right!I would assume that this could also be used for the Logitech G920 as well. *Please note that you can adjust the FFB – “per car” in Raceroom, by going to “car setup,steering seetings” in there you will find a “FFB Multiplier” simply adjust this to get a better feeling for the car you are using.*?Real? Feel = I don’t know the real feel of driving the real versions of the beasts represented in Sector3’s Raceroom – therefore the reason for the ?
No Led’s – Get this
When I first installed the Logitech G29 wheel for use in Raceroom, the gear-change (rev) leads did work on the wheel. However after an update/patch of either Raceroom, or the Logitech Gaming Software they ceased to work.*
If your Leds dont work, and you want them to, I suggest you head over to the Fanaleds website and download their little application. Visit [link]
*Future patches may fix this issue.
Logitech Gaming Software Setup
I’ve kept this as simple as possible – I havent made a profile for buttons etc, just modified the “steering wheel” and “pedal” set as follows:
Steering Wheel – Axis Properties
+ Sensitivity = 75%
+ Wheel operating Range = 900 degrees
+ Enable Centering Spring = OFF
Pedals – Axis Properties
+ Accelerator Sensitivity = 100%
+ Brake Sensitivity = 100%
+ Clutch Sensitivity = 100%
All other settings are user preferences.
The Main Part – Raceroom Experience
* – changed in update 23-10-16
Here we go this is the key part to my G29 ?Real? Feel setup Sector3’s Raceroom game….
Lets start in the in-game wheel setup. Again I haven’t adjusted too much in these settings.
+ Speed Sensitive Steering = 0
+ Min Steering Speed = 100
+ Max Steering Speed = 299
+ Analog Sector 1 = 0
+ Analog Sector 2 = 0
+ Analog Sector 3 = 0
+ Rteturn Multiplier = 4
+ Steering Sensitivity = 55%
+ Throttle Sensitivity = 50%
+ Brake Sensitivity = 50%
+ Clutch Sensitivity = 50%
+ Steering Deadzone = 0%
+ Throttle Deadzone = 0%
+ Brake Lower Deadzone = 0%
+ Double Shift Prevention = 0.05s
+ Brake Upper Deadzone = 100%
+ Clutch Upper Deadzone = 100%
+ Clutch Biting Point = 1
Now – lets amp up the feel with the Force Feedback settings:
General Force Feedback Settings.
+ Force Feedback = ON
+ Inverted Force Feedback = ON
+ Gamepad Rumble = OFF
+ Force Feedback Intensity = 100%
+ Smoothing = 63%*
+ Force Feedback Spring = 0%
Force Feedback Damper = 29*%
Steering Force Settings.
+ Steering Force Intensity = 166%*
+ Force Feedback Minimum Force = 24%*
+ Understeer = 83%*
+ Vertical Load = 103%*
+ Lateral Force = 149%*
+ Steering Rack = 37%*
Force Feedback Effect Settings.
+ Slip Effect = 100%
+ Engine Vibrations = 0%
+ Kerb Vibrations = 47%*
+ Shift Effect = 0%
There we have it, Sdemonnz’s Logitech G29 ?Real? Feel force feedback setup…..feel free to edit to your own likings.