Overview
Good competitive settings for any Xbox/PS4 type controller. I used these for years before i got a wheel and they worked very well.
The Settings:
Set up the button assignments however you like.
I suggest:
R-Trigger = Throttle
L-Trigger = Brake
L-Analogue stick = Steering
X/Square = Gear Down
B/Circle = Gear Up
Use the following Advanced Settings:
Speed Sensitive Steering=”0.0″
Speed Sensitive Steering Minimum Speed=”0.0″
Speed Sensitive Steering Maximum Speed=”0.0″
Analog sector1=”3.0″
Analog sector2=”2.5″
Analog sector3=”2.5″
Analog return multiplier=”1.2″
All Inner deadzones 0 or as small as possible.
All outer/upper deadzones 100
All sensitivity settings at 0
Other + Car Settings
General Options
Set the Wheel/Hands to visible and the rotation animation (fixed/custom) from 180 to 270 degrees depending on how you like it.
IN EACH CAR
Enter the car setup for every car you drive and set the steering rack from 9 to 12 degrees as a starting point. tune from there as you feel. some cars need more some less.
this is in the TOP RIGHT of the setup page for every car you drive! you must set this PER CAR!
Don’t change the wheel rotation degrees! (it should be fixed at 180-270 as we set in the General Options)
How to Drive it?
Small movements and slow inputs
DON’T WAG THE STICK FULLY LEFT/RIGHT
Make small millimetric precise movements on the steering stick. don’t clang / click it side to side.
Practice and you will get better.
PROFIT!