Logitech Cordless Rumblepad 2 -FIX- For King’s Quest

Overview

This guide will let you fix the following issues of Logitech Cordless Rumblepad 2 Controller for King’s Quest: The Y-axis of the Left Stick is inverted The X and Y buttons are reversed The A and B buttons are reversed

Inverting the Left Stick Y-Axis

If Graham walks forward while you press down on the left analog stick and walks backward when you press up on the analog stick.

1. Browse to the <steam game folder>steamappscommonKing’s QuestGrahamsGameConfig directory where the game is installed.
2. Right click on the DefaultInput.ini file and select Properties.
3. Verify that the “Read-only” option is not selected.
4. Next, right click the DefaultInput.ini file again and select “Open with …” then choose Notepad.
5. Locate the following entry within the file:
   .Bindings=(Name=”XboxTypeS_LeftY”,Command=”Axis aBaseY Speed=1.0 DeadZone=0.3″)
6. Within the entry find the 2 variables that say “Speed”, change both from ’1.0′ to ‘-1.0′
7. It should now look like this:
   .Bindings=(Name=”XboxTypeS_LeftY”,Command=”Axis aBaseY Speed=-1.0 DeadZone=0.3″)
8. Save the file, and then test it out to be sure.

Swapping X/Y and A/B Buttons

Follow these next steps ONLY if you would like to swap the X/Y and A/B controller buttons within the game.

1. Locate the following entries:
   .Bindings=(Name=”XboxTypeS_A”,Command=”Fire | GBA_GppActionPressed | GBA_GamepadAButtonPressed | Button bXBoxTypeButtonA”) .Bindings=(Name=”XboxTypeS_B”,Command=”OnGppCancelPressed | GBA_GamepadBButtonPressed | Button bXBoxTypeButtonB”) .Bindings=(Name=”XboxTypeS_X”,Command=”OnGppProfileChangePressed | GBA_GppInventoryPressed | OnGppSaveSlotCopyPressed | GBA_GamepadXButtonPressed | Button bXBoxTypeButtonX”) .Bindings=(Name=”XboxTypeS_Y”,Command=”OnGppHelpManualPressed | OnGppSaveSlotDeletePressed | GBA_GppExamineItemPressed | GBA_GamepadYButtonPressed | Button bXBoxTypeButtonY”)
2. Simply change the letters (A, B, X, Y) in each entry to swap the default button controls.
   a. Change XboxTypeS_A to XboxTypeS_B
   b. Change XboxTypeS_B to XboxTypeS_A
   c. Change XboxTypeS_X to XboxTypeS_Y
   d. Change XboxTypeS_Y to XboxTypeS_X
3. It should now look like this:
   .Bindings=(Name=”XboxTypeS_B”,Command=”Fire | GBA_GppActionPressed | GBA_GamepadAButtonPressed | Button bXBoxTypeButtonA”) .Bindings=(Name=”XboxTypeS_A”,Command=”OnGppCancelPressed | GBA_GamepadBButtonPressed | Button bXBoxTypeButtonB”) .Bindings=(Name=”XboxTypeS_Y”,Command=”OnGppProfileChangePressed | GBA_GppInventoryPressed | OnGppSaveSlotCopyPressed | GBA_GamepadXButtonPressed | Button bXBoxTypeButtonX”) .Bindings=(Name=”XboxTypeS_X”,Command=”OnGppHelpManualPressed | OnGppSaveSlotDeletePressed | GBA_GppExamineItemPressed | GBA_GamepadYButtonPressed | Button bXBoxTypeButtonY”)
4. Save the file, and go test it out to be sure!