Overview
This is a guide on how to use copy and paste!
How to Start Coping and Pasting
First thing to do to open copy and paste is to press F11.
1. A simple message telling you that you are in the copy and paste manager.
2. Press to place the first corner of your build.
3. Press to place the second corner of your build.
4. A simple message that is telling you you have to selected two corners.
5. Press “?” to open up your Schematic Library (More on that later).
Selecting an Object to Copy and Paste
Start by selecting the lowest left corner block of your build by press the INSERT key.
Next, select your upper right corner block of your build by pressing the DELETE key.
You are now done selecting your build! Just simply press the END key to ‘grab’ the region you have selected.
*Please note that if your X or Y is negitive, the region may be off by 1 block.
Using Copy and Paste
1. If you press the INSERT key, it will change the INSERT block to that block, updating the region.
2. If you press the DELETE key, it will change the DELETE block to that block, updating the region.
3. If you the HOME key, it will paste the object.
4. If you press X, it will move your object one block on the X. Same for Y and Z.
An example is, if you press Y ten times, it will raise the block 10 blocks into the air.
5. Does the same as 4, but in the opposite direction.
6. O.o (skipped 6 on accident, lol).
7. If you press the < key (next to M), it will save your build to the Schematics Library.
8. If you press the R key, it will rotate your object clockwise along the Y axis.
9. If you press the ? key, it will bring up your Schemactics library list.
Schematics Library
If you press the ? key, it will bring up the Schematics Library.
Here, you can load schematics you have saved or downloaded off of the steam workshop and paste into your world.
Use the arrow keys to look through the builds you have, and press the ENTER key to select it.