Overview
How to easily clean germs in polluted water so that it’s ready for water sieve
What buildings you need
Liquid Reservoir[oxygennotincluded.gamepedia.com]
Liquid Shutoff[oxygennotincluded.gamepedia.com]
Mechanized Airlock[oxygennotincluded.gamepedia.com]
Filter Gate[oxygennotincluded.gamepedia.com]
Buffer Gate[oxygennotincluded.gamepedia.com]
Room full of chlorine ( i use a natural one )
Assembling
Please left the Liquid Shutoff input for the last
Every Liquid Reservoir is independent of each other.
You can build only one set if you want, i have 3 because of my high clean water needs.
Building settings
- Set Filter Gate to 30s (Can be less, but i like to be safe)
- Set Buffer Gate to 200s. This is the approximate time needed to clean the germs. Can be less depending on the amount of the germs. But to be safe just set it on max. At the first trial i even use double buffer gate to gain 400s delay (which is an overkill as all the 1.000.000 germs died before 200s)
- Set Liquid Reservoir High Threshold on 99. A MUST.
After all of that, you can connect the liquid input to the shutoff