Overview
In this guide I will try to help you configure your controller for SpeedRunners
Introduction
Hi everybody!
In this guide I will try to help you set your controller up for Speedrunners
I am doing this guide since I see loads of people asking for help and I would like to make a one-stop place where you can see how to play with your favorite pad.
Keyboard
I know, it’s not a controller, but since you can play with it I will simply explain how to play (I also need this section for later)
Open the game, use the default controls and have fun!
(I’m going to list the default controls, please look at the Options>Edit Controls screen from the game in order to see yours, or modify them)
- Z: Jump;
- X: Grapple;
- Arrow Down: Slide;
- C: Use Pickup;
- Spacebar: Boost;
- F: Taunt;
- Arrow Left: Go left;
- Arrow Right: Go right;
- TAB: Player infos.
- Esc: Pause
XBOX 360/XBOX One Controller
You don’t have to do anything!
Just plug the controller up on the computer, open the game and enjoy it!
(I’m going to list the default controls, please look at the Options>Edit Controls screen from the game in order to see yours, or modify them)
- A: Jump;
- X: Grapple;
- Y: Slide;
- B: Use Pickup;
- RT: Boost;
- RB: Taunt;
- Dpad Left/Left Stick Left: Go left;
- DPad Right/Left Stick Right: Go right;
- Back: Player infos;
- Start: Pause.
PlayStation 3 Controller
The PS3 Controller is not supported by default on SpeedRunners, but you can make the PC believe that you’re using an original XBOX360 controller with a few programs (you only need one from the following list – I will only quickly explain what the programs do, since I’m not good at explaining stuff, I’ll also provide links to detailed guides where needed)
Program: [link] or [link]
Guide: [link]
With this program you need to put the exe you’ll download in the Speedrunners folder, plug the ps3 controller in the computer and then boot the executable up. The program will create a few files that will allow you to use the pad as an original xbox360 one.
Keep in mind that you (may) now need to enable the 32-bit version of XInput 1.4 in order to make it work (if it doesn’t):
1. In x360ce go to the “GameSettings > My Game Settings” tab.
2. Select SpeedRunners.exe there
3. Under XInput Files also check “32-bit” on the “v1.4” row (The value there should now be 0000000C)
Program+Guide: [link]
With this tool (which I personally use) you will only need to plug the controller and play the game, since this program basically creates a service that starts itself up when you boot your PC. It’s lightweight and doesn’t need configurations (you can actually modify stuff but it’s not needed).
Program: [link]
Guide: [link] (the guide says to download the version you actually need, but from version 0.7.0000+ it’s an all-in-one package)
With this program you only have to open the application, plug the controller in, click a button and you’re good to go. I personally tested it and it works like a charm. Someone says that is an adware but I never had problems using it. Since you’re looking for ways to play Speedrunners with other controllers than the Xbox360 one you’ll mostly play online, but if you’re offline you won’t be able to use this program. So you can use Better DS3 along with MotionInJoy
Program: [link]
Guide: [link] (there’s a video and a comment from the developer that explains how it works)
This tool is an “add-on” for MotionInJoy. It actually uses its drivers but you don’t have to be online in order to use it.
When you’ll play with the PS3 Controller keep in mind that you’ll see the xbox360 buttons instead of the PS3 ones, so look at the following table in order to recognise them quickly
L3, R3, Dpad, Home Button and sticks are the same
Wii Controllers/WiiU Controllers
You can actually use your Nintendo branded controllers as a XBOX360 controller, just like the way you can do it with a PS3 controller (you can only use them wirelessly, no wired connections)
WiinUPro [link]
Guide:
Install the drivers, plug the controllers in, modify the controls if you need to and you’re good to go.
I suggest you, if you use a WiiU controller or Wii/WiiU controller Pro to switch A to B and X to Y so it will look like a classic XBOX controller
-Thanks Olomorn for this suggestion-
PC Controllers/Other Controllers
If you have a generic PC controller or a Compatible PC gamepad the game won’t recognise it like the PS3 controller. Since you can’t use the PS3 tools you can use a few programs that simply bind joypad buttons to keyboard keys. Remember to bind the controls from the “Keyboard” section of this guide, so when you open the game you’ll be able to use the controller in-game.
I’m going to list four programs, a paid only one, a shareware one and two free of charge, so there’s a solution for everyone.
Xpadder is a paid only tool that let you configure ANY controller (even xbox360 and ps3 controllers) and make the PC believe that you are actually pressing keyboard keys. You can also create multiple profiles and move the mouse with buttons (or analog sticks).
I personally tested it and I can say that it does its work very well.
Program: [link]
Guide: Didn’t find a guide, sorry, but as far as I know you have to plug the controller in the PC, open the program up and you’ll see a list of buttons; if you press one of the controller button a key from the list will light up, click on it, set up the button; repeat for all the buttons.
Joy2Key is a shareware tool (there’s a free trial in the download section) that basically does the same stuff of Xpadder. I tried it with another game and it works.
Program: [link]
This free tool provides the same features as the other tools. Plug in, configure and you’re good to go.
Program: [link] or [link]
Guide: [link]
With this program you need to put the exe you’ll download in the Speedrunners folder, plug the ps3 controller in the computer and then boot the executable up. The program will create a few files that will allow you to use the pad as an original xbox360 one.
Keep in mind that you (may) now need to enable the 32-bit version of XInput 1.4 in order to make it work (if it doesn’t):
1. In x360ce go to the “GameSettings > My Game Settings” tab.
2. Select SpeedRunners.exe there
3. Under XInput Files also check “32-bit” on the “v1.4” row (The value there should now be 0000000C)
Using your controller in-game
Now that you’ve your controller ready to play you can now set up the controller with the Steam configurator tool integrated with Steam
You can follow this guide made by the developers in order to get it done
[link]
If you’re using a pc controller or other usb controllers, with this guide you can do everything with the mouse and then play with the gamepad, since you’re emulating a keyboard.
Conclusion
I hope I helped you out with this guide. If I missed something or you want to contribute with other programs feel free to comment or send me a message, I’ll update this guide as soon as possible.
Have fun!