Overview
In this guide you will learn how to use ELDRON’s cargo wagon.
Connecting a container
To connect a container to the wagon, simply tow the container with a container mover like the CCR4 or the Evolution next to the right side of the wagon. (As shown on the picture below.)
After that go to the control panel on the front of the wagon then turn on the power and simply release the frame lock and start moving out the frame. Now make sure the container is directly below the frame. And that the top and the bottom connectors are enabled on the container.(As shown on the picture below.)
Now just enable the frame connectors on the wagon’s panel and you should see the container connect. Now you can just simply hold the frame in button to get the container inside the wagon. After that just enable the container securing connectors once its inside. Now it should be fully secure and connected. (As shown on the picture below.)
HAVE FUN!!!
Connecting the Evolution
You can transport the evolution with this wagon, which is quiet handy if you need to do missions far away from you current position.
To connect it just go to the front panel of the cargo wagon and release the frame locks, then move out the frame as much as you can. Then click on mag toggle / release connector. (Leave it on) This will release the attachment on the middle winch. Now you can hold winch up to tighten the winch rope. After this simply park the evolution directly under the frames so the top docking connectors on the evolution is directly below the middle frame connectors. (As shown on the picture below.)
After this, press 5 in the Evolution to lift it. This will make you connect to the frame.(You can press 5 again to retract the raiser arms.) After this you can get out of the evolution and connect the ropes on the left and right side. This will reduce the movement of the Evolution while travelling with high speeds. (As shown on the picture below.)
Now you are ready to go, Have fun!!
Carrying misc. items
To carry misc. items, simply get the appropriate connector from the front and attach it onto the winch. Now just get your cargo below the winch, connect it and winch it up. Have fun!!