Overview
This is how to make the World of Tanks starter American Tank; The T1 Cunningham!(Feel free to make modifications and post them in the comments if possible to let me see what the builders out there can do!)
What You’ll Need
*4 Tank Track Warthogs
*124 Cubes
*4 Edges
*12 Edge Rounds
*1 Top Laser Disintergrator
*2 Eletroshield C’s (1 Left, 1 Right)
*1 Rod Short
You’ll need these to build the T1.
Step 1: The Tracks
The most simple step, Laying down 4 Tracks…
Step 2: The Hull
The Next part is actually building a Platform/Hull, You’ll need 94 Cubes and 2 Edges.
Step 3: The Turret Base
The next part is building the Turret Base. This Requires 21 Cubes and 2 Edges.
Step 4: The Turret
This is the part where you actually build the Turret. This takes 15 Cubes, and 12 Edge Rounds.
Step 5: The Gun and Armor
The Final Step, The Gun and the Armor! This requires 2 Eletrosheild C’s( 1Left and 1 Right), 1 Top Laser Disintegrators, And 1 Rod Short
Mod 1: Extra Laser
With this mod you can add and Extra laser to the Rod Short on the Turret, doing this though will make you lose 3 Cubes of armor, just make sure that it’s a Front Laser Disintegrator.
Mod 2: Medic
With this mod, You can have the ability to heal your Teammates! All you need is a Nano Constructor. (Note that you cannot use both Mods at the same time.)
Extra Comments
Note that this is an actual tank, the design is based off the T1 of WoT.(worldoftanks.com/en/tankopedia/A_107_T1_HMC/ ) I will be making more guides on how to make some Robots, including more tanks, but for now I don’t have the time, it took me apox. 1 hr. to make this guide( Itself, not counting the building of the T1). I will be uploading the T1 to the Robot factory if you don’t feel like building one yourself. Also make sure to check out my YouTube Channel if you want to! The link is in my profile!