Scrap Mechanic Guide

How to create an air-propulsion device (easy!) for Scrap Mechanic

How to create an air-propulsion device (easy!)

Overview

A guide to make a device that sends you flying into the air! Before you continue, you need to know that THIS IS A GLITCH and it is not supposed to be in the game, so HURRY UP AND DO IT BEFORE IT GETS PATCHED :O

Step 1:

Place down any block in any way/shape/form. Light blocks work best.

Step 2:

Use any method to make the creation loose, so you can knock it around.

Step 3:

Now that it’s loose, place it onto a lift. You don’t have to, but I highly recommend it.

Step 4:

Place down as many boosters as you can, but make sure you can still stand on a solid surface.

Step 5:

Place down a switch and connect all the boosters to it.
There will be ALOT of wire…

Step 6:

Remove the lift.

Step 7:

Activate the switch, then quickly put it on a lift, you can take as long as you want to place it down. Make sure nobody has deactivated it and it is still spazzing about.

Step 8:

Once you’ve placed it down, the switch should make a noise as if its being turned off and on over and over again. This normally goes on for 1-2 seconds. If it goes on for longer, thats fine. You can then jump onto it, and raise it as high or as low as you want.

Step 9:

Press the button. If you fly into the air that means you’ve done it right! Experiment around to see if you can get higher. Also, this works with multiple people on it, so if you build one big enough and get a bunch of people to stand on it, it’ll be fun!

Have Fun!

COMMENT BELOW ASKING ANY QUESTIONS OR ANY WAYS YOU’VE IMPROVED THIS DEVICE!
SteamSolo.com