How to make ‘Anti-Tier:1-2’ Insta-Kill Light Assault Hover Tank [Outdated]

Overview

In this guide, I will teach you guys how to make a hover tank that is fast, agile, and very destructive.This hover tank only has 1 gun but, it is out-leveled compared to normal tier ranked robots which will just wreck the crap out of them.

Basic Build

I mentioned so few times already that it was outdated and broken.But this don’t mean that you can still modify and be inspired base on mine.
In this tutorial I’m going to show you how to build a kill bot aka troll bot with outranking weapon that would rekt the crap out of enemies! Most likely 1-2 shot kill!
Let’s get down to it straight!

So this is what we need.
This build is convertible between Anti Tier 1 or Anti Tier 2.
So depending on what you wanna build, the material varies.
This build will use Plasma launchers at rank of at least T4 and T5 so if you don’t have those, I’m sorry my friend ;C

• 7 Light Chasis Blocks
• 6 Light Chasis Prisms
• 12 Light Chasis Tetras
• 4 Light Chasis Inner
• 5 T1 Hover Blades
• 2(L)+2(R) Electro Plates that looks like a shield (Only for Tier 2)
• 2 T1orT2 Thrusters (T2 for Tier 2 Setup)
• 1 WindShield Block
• 2 WindShield Tetras
• 2 WindShield Inner
• + Accessories (Optional)

Now, this list above is based on T2, so If you are making T1, you will have some left overs.

We will start out putting 7 Light Chasis Blocks and 2 Light Chasis Prisms in the back and front FLIPPED

We are going to add 4 Light Chasis Inner Blocks, 2 on the front, 2 on the back. Watch for Rotation.

Add 4 Light Chasis Tetras like so.

Then, we are going to add WindShield first, so put 1 WindShield Block on the center bottom, 2 WindShield Inner on the bottom sides like that, and put 2 Tetras on the top like so.

And, then add 3 Light Chasis Prisms facing inwards on the back side of the seat like the picture.

And, add 4 Light Chasis Tetras on each side like the picture so that it would form diamond shape looking from the top.

Also, one on the each sides under the diamond spike correspondingly.

And, we are going to add T1 Thrusters under the spikes thrusting forward.
[This section of guide will go through Tier 1, and then second section will continue from this section which will cover shifting up to Tier 2-So If you are going to make Tier 2, you could change it now for T2 Thrusters, but I would recommend just following the instructions first. :D]

Pick up the T1 Hover Blades, and then put 1 on the back, and 2 on the sides where we put 3 Light Chasis Prisms before.

Put rest of them (2 Hover Blades) on each side of the front Light Chasis Inner blocks.

And, finally, add T4 Plasma Launcher [If you want, maybe other fitting weapon].
Now, you have Anti-Tier 1 Light Assualt Hover Tank! Congratulations! 😀

In the Next section (Scroll down), we will cover shifting this to Tier 2!

Shifting Gear Up To Tier 2

Well, you just completed Tier 1 Build, Now from now on, this will go up to Anti Tier 2 LA-HT! 😀
So let’s proceed on!

We are going to start out by changing those old rubbish T1 Thrusters to T2 Thrusters.
You should know how to change it. If you don’t, you are dumb. xD

And then, we will add 1(L)+1(R) Shield-Shaped Electro Plates like so on each sides on the front Light Chasis Inner blocks, like so, so that it will cover front sides and leave a peek hole in the center.

Then, we come to the back side and we will use 2 Light Chasis Prisms to make a little tail that falls out of the butt 😀

And then, we will add 2 Light Chasis Tetra to the sides of that prism tail, after that, it should look like this.

After that, on that, add 1(L)+1(R) Shield-Shaped Electro Plates like the front but just at the back like the picture.

Now, I added a light on the center but I removed it later. If you want, you can leave that there. Just don’t whine later that you have too much Robot Rankings that it will shift you up to Tier 3 just because you didn’t remove that.

And we will change the main T4 Plasma Launcher with T5 Plasma Launcher.

And this picture just shows what I did with antenna that was down there, which I moved it up infront of the cockpit. (That’s what she said)

Congratulations! Now you are officially done! Go whip some people!
😀

Completion

Thank you for reading and if my guide helped you gain some RP and TP, please leave a comment below and hit dat like button! 😀

Ps: Thing about AT2 LAT(Anti Tier 2 Light Assault Tank) is, it has small window at the front that you can shoot through, like some of real tanks. so you have to angle your self right and then shoot.

**POST PATCH UPDATE**

Well, I just noticed they took away T1 Hover blades, the electroplates, and wings.
It hit my guide badly and it is very broken like what ‘Bob’ said [Thanks bob? :D]. So, guys, I’m sorry but you can modify little bit from this guide and I’m very disappointed right now :C
My modifications goes like this.
Tier 1 Design with T1 Hoverblades to T2 Hover blades.
and Few extra modifications such as Duel Radar jammer set and
ect..

Well.. yeah.. it sucks.