Overview
Hi everybody, I’ve never done any guides but i wanted to share my plasma bomber as I’m proud of my creation.This plane is pretty slow, it takes forever to take off but once you are up it has a good turning speed and maneuverability.It has a lot of shields so that you can take some damage, the only problem with it is it hasn’t got any guns redundance, as it has only 6 guns.
What you need to build it
- lot of prisms and cubes (I use t10 and t8 ones)
- x2 t8 shield (2 left)
- x2 t9 shield (1 left 1 right)
- x2 t10 shield (1 left 1 right)
- x6 t10 plasma gun
- x12 trusters (I use 6 t10, 2 t9, 2 t8 and 2 t7)
- x2 wing (I use t10)
- x6 rudder (I use 4 t10 and 2 t7)
- x1 pilot seat (you don’t say?)
Building the plane
Let’s start with the base, wich is 17×4.
In the front I use prisms to lighten the plane.
Then you add the supports for the guns, wich are 4 cubes with 1 prism at the nose, and 5 cubes with 1 prism for the core and the tail. Add then 2 cubes at the tail and 2 prisms at the nose.
Now the wings: 2 wings at the center and 4 rudders for nose and tail.
The last 2 rudders go on the tail.
Now place the pilot seat.
Place the guns underneath the prisms.
At this point you should place the thrusters, follow the image below if you need help.
Ok now that the top is finished let’s go for the bottom.
Follow this images for the cubes and prisms under the base and the shields.
Comments
I didn’t use any radar nor radar jammer as I don’t find them very useful. If you do want them though, you can put them wherever you want 😉
I put another t10 shield in the center, as the cubes there are the “weak spot” of the plane. It’s a bit ugly though so if you want the best looking plane you don’t want to use it.
Here some other images of how the plane sould look like.
