Robocraft Guide

T-4 to T-5 Plane: The Sparrow for Robocraft

T-4 to T-5 Plane: The Sparrow

Overview

A small and fast plane that is realativly cheap, but moderatly weak.

Step 1: What you will need

Alright, to start off, your going to need 15 basic blocks, 2 prisms, 2 areofoil T5, 3 rudder T5, 3 thruster T6, 2 thruster T4, 1 thruster T1, 2 allighnment rectifiers. The next thing you need are your weapons, I have personally never used SMG’s but you can try if you like, You can fit 3 T6 cannons or T5 depending on what tier you want or 2 nano disruptors which have actually worked out increadibly well.

Step 2: The body

The body of this ship is increadibly simple, tower a little into the air to start building and leave one block, from that block place 8 blockes in a straight line behind it. Underneath your starting block place a single block and behind that one place 5 more blocks. Finally infront of the two starting blocks place two prisms to where they face each other.

Step 3: Movement

The next step is best shown with just pictures so just copy the next two images to place wings and thrusters.
Place the pilot seat in between the two thrusters on top.

Step 4: Weapons and pilot seat

Fit the pilot seat inbetween the T1 and T6 thrusters.
For the weapons, the configuration for cannons is
and the configuration for the nano-disruptor is

Place alighnment rectifiers on the bottom or whereever you like, they help to get out of jams.

Step 5: Helpful hints

If you are stuck on your nose, use alighnment recifiers and when your in the air go back, you will land on your belly

if you get so high your plane is stuck pointing up, cut the thrust and use shift to go down

Thats about all you need to know about this guide and simple and easy to make ship, many blocks can be substituted by others as seen by the pink to blue in the pictures.

Good luck, and Happy Flying!

SteamSolo.com