[Tier 4-6] The Interceptor

Overview

Here is another robot building guide where i will teach t5s to build their first STABLE flying robot! This design varies from tier 4 to tier 6 depending on what you add.

Introduction

Welcome once again! Today i will be teaching you (tier 5s) how to build your first STABLE flyer!

So, lets get started (I dont feel like making some long introduction today).

Requirements

Ok, you need at least 500 PFlops to make this design EXACTLY how i have done so (without weapons or electroplates)

Ingredients:
54x Cube*
20x Prisim*
2x Wheel*
2x Wheel Steering*
4x Thruster T2
2x Thruster T4
2x Thruster T5/T6
2x Aerofoil T5
3x Rudder T5

*Any tier

I will be honest, getting that was a pain in the a$$.

Step 1 – The Chassis

Ok so lets start out with the base, we are gonna make this thing now!

Please note – you shouldnt use light chassis blocks for this, it wont end well…

And then we add prisims:

Now the second layer, 1 block beneath the other bit you just made…

Done? Good! This next bit is the wheel/sled mounts (yes you can add sleds later)
Front:

Back:

Done!!! Next bit is the wheels, wings and thrusters!

Step 2 – Wheels, Wings and Thrusters

Ok, now lets make this thing move.

Note – Thrusters are the recommended tier, you may change this at your own risk!

Front Wheels:

Back Wheels:

Wings:

Rudders:

Forward Thrusters:

Upward (Nose) Thruster:

Downward Thruster:
(This goes in that gap, remember?)

Reverse Thrusters:

Done! Now the weaponizing bit…

Step 3 – Weapons and Electroplates

Before we begin this bit, you may do whatever you want here, THIS IS COMPLETELY OPTIONAL!!!
If you want to go as a scout with no weapons, go on! 🙂

With that out of the way, lets get started…

Smgs:

Nano Medic:

Electroplates:

Ok, All done!!!!!

If you enjoyed this please rate up, i do apreciate it!

Until next time, see ya!