Tyrrell P34 MK.III (SMG Cruiser)

Overview

This is the third version of the Tyrell P34 F1 thing I made several months ago. I got rid of the F1 in the name because it literally looks nothing like the P34 F1 apart from the odd 6-wheel configuration. I skipped the MK.II because it’s just 2 blocks wider and nother else.

Introduction

As said before, this is based on the Tyrrell P34 F1 car, but with a few alterations. This took me months to make enough money to upgrade from T6 cubes to T10. Hopefully it will be useful to you. Below are pictures of the Mk.I (T8), Mk.II (T9), and Mk.III (T10).

Requirements

To recreate this thing, you will need the following:
-620 x T10 Armored Cubes ( 209x Cubes; 175 x Prisms; 30 x Tetras; 206 x Inners)
-1 x Pilot Seat
-10 x T10 SMGs
-6 x T10 Wheels Steering
-4 x T10 Electroplates (2 x left; 2 x right)
-2 x T9 Electroplates (1 x left; 1 x right)
-2 x T10 Thrusters
-3 x T8 Thrusters
-1 x Speedometer (optional)
-1499 pFLOPS
-10276072 RP (quite a lot)

Step by Step

Step 1: Build a shaft 20 cubes long
Step 2 (enable mirror mode): Add 13 Cubes and 66 Inners
Step 3: Add Pilot Seat
Step 4: Add 11 Prisms
Step 5: Add 3 Cubes and 1 Prism
Step 6: Add 9 Cubes along the middle
Step 7: Add 21 Cubes (3 x 7)
Step 8: Add 6 Cubes, 5 Prisms, and 12 Inners
Step 9: Add 5 Cubes and 4 Inners
Step 10: Add 5 Cubes and 8 Inners
Step 11: Add 6 Cubes and 1 Tetra
Step 12: Add 3 Prisms, 4 Tetras, and 4 Inners
Step 13: Add 1 Cube and 3 Tetras
Step 14: Add 2 Cubes, 1 Tetra, and 3 Inners
Step 15: Add 5 Cubes, 5 Prisms, and 4 Tetras
Step 16: Add 1 Cube, 3 Prisms, and 2 Tetras
Step 17: Add 1 Cube, 5 Prisms, and 1 Inner
Step 18: Add 1 Cube and 4 Inners
Step 19: Add 4 Cubes
Step 20: Add 6 Prisms
Step 21: Add 8 Prisms
Step 22: Add 3 Cubes and 2 Prisms
Step 23: Add T8 Thrusters
Step 24: Add 5 Cubes and 1 Prism along the middle and 5 Cubes and 2 Prisms
Step 25: Add 4 Cubes and 2 Prisms
Step 26: Add 3 Cubes, 1 Prism, 1 Inner, and 1 Tetra
Step 27: Add 3 Prisms and 2 Tetras
Step 28: Replace the 3 Cubes with 3 Prisms
Step 29: Add 4 Prisms
Step 30: Add 3 Prisms and 1 Tetra
Step 31: Add 1 Prism and 2 Tetras
Step 32: Add a shaft of 3 cubes long along the middle with 2 Prisms and 1 Inner
Step 33: Add a rectangle of 6 Cubes by 2 x 3
Step 34: Add 4 upside down Prisms
Step 35: Add 1 cube and 3 Prisms
Step 36: Add a row of 5 Cubes
Step 37: Add a row of 5 forward facing Prisms and a row of 5 upside down backwards-facing Prisms
Step 38: Add a row of 5 Cubes the 2 rows of Prisms
Step 39: On top of the 5 Cubes, add 11 Cubes
Step 40: At the ends of the 11 Cubes, add an octagon with the exception of the top left corner being made out of a Cube
Step 41: Add a row of 9 Prisms, with the exception of the middle one being upside down
Step 42: Add a row of 9 upside-down Prisms
Step 43: Add a row of 9 Prisms
Step 44: Add T10 Wheels Steering
Step 45 (disable mirror mode): Add T9 Electroplates
Step 46 (re-enable mirror mode): Add T10 Electroplates
Step 47 (Optional): Add speedometer
Step 48: Add thrusters
Step 49: Add guns
Step 50: Done.

Author’s Notes

Building Notes:
-Most Armored Inners can be replaced with Armored Cubes, I used Inners to save weight, but if you’re cash strapped, using Armored Cubes would save you around one and a half million RP.
-You can also build this with T9 parts (cubes, guns, wheels, thrusters), but with Megabots, I’d rather not.
-This is also compatiple with Plasmas and Medics, but I have never tested this as a Plasma Cruiser or Medic Cruiser, so I have no idea how well they perform.
-Use Mirror Mode to make your building process easier.
-2 SMGs mounted sideways on the spoilers are blocked by the electroplates; you can fix this by making the rear spoiler wider by 2 blocks, doing so would add 8 cubes and 95880 RP to the cost.

Performance Notes:
-Top speed close to 120 MPH, or 193 KPH.
-Handling is responsive, feels like it’s about to roll, never does.
-Capable of 6-wheel drifts.
-Literally uncontrollable if both rear wheels are gone.
-Shooting forwards is good, only 2 guns on the side of the rear spoiler are blocked.
-Shooting sideways is decent, 4 guns are blocked occasionally.
-Shooting backwards is hopeless, only 4 guns aren’t blocked.
-Shooting upwards is excellent, no guns are blocked.
-Front is not very well protected.
-Nearly impossible to destroy in 1 shot, unless a volley of plasma hits directly above the pilot seat.
-Anything could happen in a game, you can get picked off first, or do 9000pFLOPS of damage (4 kills + AFK Mega = RP).
-Before Mega Bots, I was averaging 2 kills per game, with occasions of 5 or 6 kills per game.