Side by side comparison of blocks T1 to TX-1

All the Wheel blocks blocks from Tier 1 to Tier TX-1 (mega), left to right.

All the Track blocks from Tier 1 to Tier 10.
Left to right, second row starts with T8.

Tracks are all aligned at the top.

All the Hover blocks from Tier 2 to Tier TX-1 (mega), left to right.

All the Rotor blocks from Tier 5 to Tier 10, left to right. Because the Rotors are so large, I had to make two rows.

Walker Legs tier 7 to tier 10 with Wolf tier 7 on the bottom row.

Mech Legs tier 1 to tier TX1.

All the Thruster blocks from Tier 1 to Tier 10, left to right.

All the SMG blocks from Tier 1 to Tier TX-1 (mega), left to right. The bay was not quite long enough to line all up on the same row so I had to move the TX-1 down.

These two show the range of the barrel. TX-1, T6, T1

All the Plasma blocks from Tier 1 to Tier TX-1 (mega), left to right. Bay not long enough so the TX-1 is lower.

All the Rail blocks from Tier 4 to Tier 10, left to right. The bay was not quite long enough to line all up on the same row so I had to raise the T10.

All the Tesla blocks from Tier 8 to Tier 10, left to right.

Here are the Electroplates Tier 2 through Tier 9.




Here are Electroplates Tier 10.1 through Tier 10.10. Not enough CPU to get four of each T10 plate, so there is one T10.10 missing.



Here are the mega Electroplates Tier MX-1A and MX-1B. Not enough CPU to get four of each so one MX-1B is missing.

Included a T10 for size reference.
The MX plates have five and six connectors, T2 through T10 only have one connector.