automatic pokeshell ranch

hi i read and built Magialisk dreko ranch and took some parts from it and put them in my pokeshell ranch look to the below to see the completed ranch
now the poke shell breeding area has to be full of the liquid of chose and no buildings except for the sweeper and three conveyor loader and the receptacle is replaced with a conveyor chute dropping into the breeding area not on the doors in the liquid if you don't want any liquid just follow the guide as normal

ok so first things first here's my screen shots so you may have noticed a small room full of polluted oxygen with meal lice in it. they are for rot piles
the hamster wheels are not part of the ranch you can supply power from any where
you can supply meal lice from any where you also don't need meal lice any thing that can rot will work
with Magialisk's guide i thought the or gate was an and gate i'm making it clear it is an or gate critter
sensor and timer senor the critter sensor is set to above 7 the timer sensor on high speed 15 on 45 off take a look at Magialisk dreko ranch to get the other timings

hi you reading this means that you have read the first two great job
so i made a few changes can you spot them all?
you can use normal wire it will not over load them because i took some automation setup from Magialisk dreko ranch
the timer for the incubator is on cycle mode. on o.1 off 1
the bottom conveyor loader is for eggs witch ever one your using to breed the middle one is for molts
the top one is for the ones you'r not breeding the get starved to death for food and i had to make some changes just to shipping that is why the screen shot is not the same

thanks i hope you liked the guide plz leave comments if anything is wrong