Kitchen with Freezer

Compact kitchen that can be constructed next to a Great Hall. The Auto-Sweeper to the furthest left will be able to insert finished food products into the fridge beyond the Pneumatic Door. The two empty tiles below the metal cooling blocks should be filled with CO2 to achieve the "Sterile Atmosphere" necessary to completely stop food spoilage when combined with the freezing temperatures provided by the Natural Gas - Thermo-Regulator cooling loop.

More construction info coming soon.

The middle Auto-Sweeper will handle delivering ingredients to the cooking appliances and delivering finished food stuffs to the edible food storage.

The left Auto-Sweeper will handle delivering editable food stuffs to the fridge so dupes can eat. I generally set the fridge to only allow 2-5kg of food at a time to prevent too much of it spoiling in the fridge.

This Conveyor Loader should allow anything that can spoil that is not a dupe allowed edible item. Examples:

• All Cooking Ingredients
  
• Meat
  
• Mushroom
  
• Pacu Fillet

This Conveyor Loader should allow anything that dupes are allowed to eat. Examples:

• Surf n' Turf
  
• Omelette

This Conveyor Loader should accept Rotten Food and Polluted Dirt to allow the left-most Auto-Sweeper to clear any rotten food out of the storage if something decomposes while cooling down the Freezer.

You have two options for cooling the Thermo-Regulator to start:

1. Use a external liquid cooling loop to keep the contained Thermo-Regulator cool
2. Remove the blocks above the Thermo-Regulator and let it throw heat into the region above the freezer.

If you do #2 then you will likely want to build the Thermo-Regulator out of Gold Amalgam so it has less chance of overheating. You may also need to mess with the Thermo Sensor to turn off the Thermo-Regulator and let it even out for a minute before turning it back on during the initial cooling phase.

After initially cooling the metal, oil, and CO2 blocks to -35C this thing does not produce much heat and can be cooled passively by removing the blocks above the Thermo-Regulator if don't want to have to run an external cooling loop it.