How to use Aquatuner and Steam Turbine to manage heat.

Have not worked out ideal amount of oil and water for aquatuner chamber. Works fine with 200kg/tile so 600kg crude oil and 600kg water/steam for this example.

Gold can be used for everything, tungsten used in this example for radiant pipes and tempshift plates.

(note the bridge is missing a connecting pipe segment in this image, my apologies)

Moves heat away from sleet wheat and directs it to pincha pepper.

Use polluted water from washrooms if possible. Assuming a sieve is being used for the washroom polluted water will arrive at 40C. The pincha pepper plants will not pick up the germs.

Set pipe thermo sensor to active when over 0C.

This design allows for adjustable localized temperature control.

Temperatures in the area unit can be controlled by adjusting the valve and temperature sensor below the unit.

Polluted water is used as coolant due to high thermal capacity and low freezing point relative to room temperature.

Buildings are made of gold or gold amalgam.

Thermo sensor set to active when colder than 130C, pipe thermo sensor should not be set to active below -5C, recommend between 15-22C. Adjust valve to change rate of temperature change.